Honeywell 30 Series User Manual

CHAPTER
88
Honeywell 30 Series IP Cameras User Guide
10 TROUBLESHOOTING
Troubleshooting for Dynamic Intra Frame Period
Before connecting the camera to NVR(s) and VMS(es) with Smart codec unsupported,
log on to the camera’s web page, go to Setup
 Camera Setup  Video  STREAM 
Video settings for main stream/Video settings for sub stream/Video settings for
third stream and uncheck Dynamic I-Frame period as shown in the following
illustration.
Figure 101 Video Settings for Dynamic I-Frame Period
Otherwise, the following problems may be observed on NVR(s) and VMS(es), when an
operator is doing actions, e.g. play live videos, play back videos and export clips.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)