Honeywell 30 Series User Manual

14
Honeywell 30 Series IP Cameras User Guide
The main page includes the following areas: system menu, live view tool bar, language
selection and user account settings.
Figure 17 Main Page
The main page of the Fisheye model (HC30WF5R1) is different from the other models.
For the main page of the Fisheye model, see Fisheye Main Page on page 16.
System Menu
When you log in to the camera via the web client, the main page opens by default. To
access the Setup page or Information page, select the corresponding tab.
Stream Profile
In the Stream Profile list, select Main Stream, Sub Stream, or Third Stream to set the
stream profile.
Main Stream
Delivers high definition video for real-time monitoring, recording,
and storage. Uses the most bandwidth.
Sub Stream Delivers low/standard definition video, typically for remote
monitoring in lower network bandwidth environments.
Third Stream
Delivers low definition video.
The properties for each stream type are configured on the Setup  Camera Setup 
Video page (see
Configuring Video Settings on page 27).
Camera Name
You can change the camera name according to your needs. For more information, see
Configuring System General Settings on page 76.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)