Honeywell 30 Series User Manual

CHAPTER
4
Honeywell 30 Series IP Cameras User Guide
2 ACCESSING THE CAMERA
This chapter contains the following sections:
• Installing the Unified Tool, page 4
• Discovering Your Camera in the Network page 6
• Assigning a New IP Address to Your Camera, page 7
• Upgrading the Camera’s Firmware, page 8
• Accessing the Camera from a Web Browser, page 9
Installing the Unified Tool
To get the installation package of Unified Tool:
• Go to https://mywebtech.honeywell.com
and login. Go to Download Center 
Video
 IP Cameras  Camera Discovery Tools & Utilities  Honeywell Unified
Tool. Download and unzip the installation package of Unified Tool to your computer.
• Copy the installation package of Unified Tool from the CD along with the package of
the camera to your computer.
To install the Unified Tool:
1. Double-click the installation program in the installation package.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)