Honeywell 30 Series User Manual

1
Honeywell 30 Series IP Cameras User Guide
ABOUT THIS DOCUMENT
This document provides instructions for accessing, configuring, and operating the
Honeywell 30 Series IP cameras. This document is intended for system installers,
administrators, and operators.
Overview of Contents
This document contains the following chapters and appendixes:
• Chapter 1 Introduction, provides an overview of the main features of the Honeywell
30 Series IP cameras.
• Chapter 2 Accessing the Camera, describes how to install the Unified Tool to
access the camera remotely from a web browser and how to update a camera’s
firmware.
• Chapter 3 Using the Main Page, describes how to log in to a camera and introduce
the main page.
• Chapter 4 Configuring Camera, describes camera configurations.
• Chapter 5 Configuring Network, describes network configurations.
• Chapter 6 Configuring Video Analytics, describes video analytics configurations.
• Chapter 7 Configuring Storage, describes storage configurations.
• Chapter 8 Configuring System, describes general system configurations.
• Chapter 9 Viewing System Info, describes system information, such as the version,
log and online user information.
• Chapter 10 Troubleshooting, lists common problems and solutions.
• Chapter 11 Appendix, lists the descriptions of symbols.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)