Honeywell 30 Series User Manual

45
Honeywell 30 Series IP Cameras User Guide
Access name for main stream/sub stream/third stream: The camera supports
multiple streams simultaneously. The access name is used to identify different video
streams. You can set up the video quality of linked streams. For more information, see
Video Stream on page 28.
Figure 53 Streaming Protocols – RTSP
To utilize RTSP streaming authentication, make sure that you have set a password for
controlling the access to video stream first. For more information, see Configuring User
Accounts Settings on page 82.
Authentication (digest): User credentials are encrypted with MD5 algorithm which
provides better protection against unauthorized access.
Access name for main stream/sub stream/third stream: The camera supports
multiple streams simultaneously. The access name is used to differentiate the
streaming source.
If you want to use an RTSP player to access the camera, you must set the video mode to
H.264 or H.265 and use the following RTSP URL command to request transmission of
the streaming data.
rtsp://<ip address>:<rtsp port>/<access name for stream 1 to 3>
For example, when the access name for stream 1 is set to live.sdp:
1. Launch an RTSP player.
2. Choose File  Open URL. A URL dialog box will pop up.
3. Type the above URL command in the text box.
4. The live video will be displayed in your player.
RTSP port/RTP port for video/RTCP port for video:
• RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By
default, the RTSP port number is set to 554.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)