Honeywell 30 Series User Manual

CHAPTER
76
Honeywell 30 Series IP Cameras User Guide
8 CONFIGURING SYSTEM
This chapter contains the following sections:
• Configuring System General Settings, page 76
• Configuring Maintenance Settings, page 77
• Configuring User Accounts Settings, page 82
• Configuring Access List Settings, page 83
Configuring System General Settings
Go to Setup  System Setup  General Settings.
This section explains how to configure the basic settings for the camera, such as the
host name and system time.
Figure 91 Configuring System General Settings
Camera Name: Enter a name for the camera. The text will be displayed at the top of the
main page.
Turn off system status indicator: If you don’t want others to notice the network camera
is in operation, you can select this option to turn off the system status indicators.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)