81
Honeywell 30 Series IP Cameras User Guide
Figure 95 Editing Language String
4. Upload the updated export_translator.xml file to your system. See Update Custom
Language File on page 82.
Export CA Certificate
The camera uses HTTPS, a secure communication protocol that verifies the identities of
visited websites and servers and encrypts data exchanged between the client and the
server. When you log in to the camera’s web client for the first time, some browsers
display a warning that the connection is not private/secure. To access the web client,
you must install a Honeywell-signed security certificate.
1. Click EXPORT to save the root certificate (ca.crt) on your local computer.
2. Go to the directory where you saved the certificate and double-click the certificate. The
Certificate window opens.
3. In the Certificate window, on the General tab, click Install Certificate to open the
Certificate Import Wizard.
4. Click Next to continue.
5. Click Place all certificates in the following store and click Browse. Click Trusted Root
Certification Authorities and click OK.
6. Click Next, and then click Finish to close the Certificate Import Wizard. A
confirmation dialog box appears with the message “The import was successful.”
7. Click OK, and then click OK to close the Certificate window. And now your browser will
not display a warning that the connection is not private/secure.
Note:
Please ensure to install the certificate to ensure a secure communication with the
camera and to avoid delays in the web page navigation.
Export Configuration File
Enter a password for exporting the configuration file and then click EXPORT to export
all parameters for the camera and user-defined scripts.
To Next Page
Loading...
Need help?
General
