Honeywell 30 Series User Manual

CHAPTER
54
Honeywell 30 Series IP Cameras User Guide
6 CONFIGURING VIDEO ANALYTICS
This chapter contains the following sections:
• Configuring Motion Detection Settings, page 54
• Configuring Tampering Detection Settings, page 58
• Configuring Audio Detection, page 59
• Configuring Event Settings, page 61
Configuring Motion Detection Settings
Go to Setup  Video Analytics  Motion Detection.
Two sets of motion detection settings are available:
• In Normal Light Mode tab, configure normal situations for motion detection
settings.
• In Profile Mode tab, configure special situations for motion detection settings.
Night Mode: Check Enable to apply these settings at and select this mode to apply
the settings at night.
Schedule Mode: Check Enable to apply these settings at and select this mode to
apply the settings at a specific period. Enter the time manually in the field.

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)