39
Honeywell 30 Series IP Cameras User Guide
By default, the optimal focus is found on a full view window. You can designate a
custom window within your current field of view to acquire the best focus out of it.
However, you cannot place a focus window on a distant background, e.g., a hallway that
stretches away for 3 meters or farther.
• Full view: The focus tuning takes place by referring to the full view.
• Custom: You can create a focus window and drag it to a place of interest in your view
window.
Note:
It is recommended to use this function only when there’s a solid object showing a
consistent color or texture in your view window. This function will not take effect if
you set the focus window on a distant background.
Configuring Privacy Mask
On this page, you can block out sensitive view areas to address privacy concerns.
Go to Setup Camera Setup Privacy Mask.
To configure privacy masks for Non-PTZ models:
1. Click NEW to add a new privacy mask window on the video screen.
2. Use 4 mouse clicks to create a new mask window, which is recommended to be at least
twice the size of the object (height and width) you want to cover.
3. Enter a name for the privacy mask and click SAVE to enable the setting.
4. Check Enable privacy mask to enable this function.
Figure 46 Privacy Mask
Note:
Up to 5 privacy mask windows can be configured on the same screen.
•
If you want to delete the privacy mask window, click on the right side of
privacy mask window name.
To Next Page
Loading...
Need help?
General
