Honeywell 30 Series User Manual

65
Honeywell 30 Series IP Cameras User Guide
Figure 76 Server Type - Email
• Server name: Enter a name for the server setting.
• Sender email address: Enter the email address of the sender.
• Recipient email address: Enter the email address of the recipient.
• Server address: Enter the domain name or IP address of the email server.
• User name: Enter the user name of the email account if necessary.
• Password: Enter the password of the email account if necessary.
• Server port: The default mail server port is set to 25. You can also manually set
another port.
• If your SMTP server requires a secure connection (SSL), select This server requires a
secure connection.
• To verify if the email settings are correctly configured, click TEST. The result will be
shown in a pop-up window. If successful, you will also receive an email indicating the
result.
Click SAVE SERVER to enable the settings.
After you configure the first event server, the new event server will be automatically
display on the Server list. If you wish to add other server options, click Add server.
Server type - HTTP
Select to send the media files to an HTTP server when a trigger is activated.
Figure 77 Server Type – HTTP
• Server name: Enter a name for the

Honeywell 30 Series Specifications

General

Video Compression	H.264
Series	30 Series
Category	Security Camera
Night Vision	Yes
Power Source	Wired
Motion Detection	Yes
Weather Resistance	Yes
Lens	Fixed
Storage	MicroSD card (up to 128GB)