HP
8114A Service Guide
Notice
warranty
This Hewlett-Packard product has
a warranty against defects in
material and workmanship for a
period of one year from date of
shipment. During the warranty
period, Hewlett-Packard Company
will, at its option, either repair or
replace products that prove to be
defective.
For warranty service or repair,
this product must be returned to a
service facility designated by
Hewlett-Packard. The Buyer shall
pay Hewlett-Packard’s round-trip
travel expenses.
For products returned
to
Hewlett-Packard for warranty
service, the Buyer shall prepay
shipping charges to
Hewlett-Packard and
Hewlett-Packard shall pay
shipping charges to return the
product to the Buyer. However,
the Buyer shall pay all shippmg
charges, duties and taxes for
product?. returned to
Hewlett-Packard from another
country.
Hewlett-Packard warrants that its
software and firmware designated
by Hewlett-Packard for use with
an instrument will execute
its
programming instructions when
properly installed on that
instrument.
Hewlett-Packard does not warrant
that the operation of the
instrument software, or firmware,
will be uninterrupted or error free.
Limitation of Warranty
The foregoing warranty shall not
apply to defects resulting from
improper or inadequate
maintenance by the Buyer,
Buyer-supplied
sofhvare
or
interfacing,unauthorized
modification or misuse, operation
outside of the environmental
specifications for the product, or
improper site preparation or
maintenance.
No other warranty is expressed or
implied. Hewlett-Packard
specifically disclaims the implied
warranties of merchantability
and fitness for a particular purpose
Exclusive Remedies
The remedies supplied are the
Buyer’s sole and exclusive
remedies. Hewlett-Packard shall
not be liable for any direct,
indirect, special, incidental, or
consequential damages, whether
based on con-
tract, tort or any other legal theory
Assistance
Product maintenance agreements
and other customer assistance
agreements are available for
Hewlett-Packard products.
For any assistance, contact your
nearest Hewlett-Packard Sales
office.
Certification
Hewlett-Packard Company
certifies that this product met its
published specifications at the
time of shipment.
Hewlett-Packard further certifies
that
its
calibration measurements
are traceable to the United States
Institute of Standards and
Rchnology,
to the extent allowed
by the institute’s calibrating
facility, and to the calibration
facilities of other International
Standards Organization members.
About this edition
HP
Part Number
08114-91021
Printed in Germany
Edition 1.0 El294
. . .
III
To Next Page
Loading...
Need help?
General
