HP
8114A Service Guide
Pulse Modes
Burst
Set a burst of 2 to 65536 pulses.
(A normal pulse is equivalent to a burst of 1 pulse)
Double Pulse
Two pulses generated per pulse-period. First pulse starts at the
start of pulse-period; double delay sets delay to the start of the
second pulse. Double pulses are available in all Trigger Modes except
External Width.
Human Interface
Display
Help Key
Memory
Memorycard
All pulse parameters at a glance on one display.
Displays context-sensitive information.
The current setting, plus nine user settings are stored in non-volatile
memory when the instrument is switched off.
Clear Memory:
Clears all stored user settings.
Instrument settings (350 bytes each) are stored in MS-DOS formatted
PCMCIA memorycards. Cards can also be used for convenient
firmware updates.
Remote Control
Function Code
Programming times
Operates according to IEEE standard 488.2, 1987 and SCPI 1992.0
SHl,
AHl,
T6, L4,
SRI,
RLl,
PPO,
DCl,
DTl,
CO.
(All checks and display off)
2-l
2 HP
8114A
Pulse Generator
To Next Page
Loading...
