Table 2-58 Settings menu (fax models only) (continued)
First level Second level Third level Fourth level Description
TCP\IP HOST NAME
IPV4 SETTINGS
IVP6 SETTINGS
PROXY SERVER
PROXY PORT
IDLE TIME OUT
SECURITY SECURE WEB
ISPEC
802.1X
ANNOUNCEMENT AGENT
RESET SECURITY
LINK SPEED AUTO
10T HALF
10T FULL
10T AUTO
100TX HALF
100TX FULL
100TX AUTO
1000T FULL
Done
The link speed and
communication mode of
the print server must match
the network. The available
settings depend on the
printer and installed print
server.
CAUTION: If you change
the link setting, network
communications with the
print server and network
printer might be lost.
The print server uses auto-
negotiation to congure
itself with the highest link
speed and communication
mode allowed. If auto-
negotiation fails, either the
100TX Half feature or the
10T Half feature is set
depending on the detected
link speed of the hub/
switch port. (A 1000T half-
duplex selection is not
supported.)
Wireless INFORMATION Print Security Report
Yes
No
Print a network security
report page.
WIRELESS STATION Status
WI-FI PROTECTED SETUP
ENWW Tools for troubleshooting 231
To Next Page
Loading...