EasyManua.ls Logo

HP LaserJet Enterprise M607n - A Printer Specifications

HP LaserJet Enterprise M607n
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Solve connectivity problems
Solve wired network problems
Solve wireless network problems
Solve wired network problems
Introduction
Certain types of problems can indicate there is a network communication problem. These problems include
the following issues:
The periodic loss of ability to communicate with the printer
The printer cannot be found during driver installation
A periodic failure to print
NOTE: If you have been experiencing intermittent loss of network productivity, rst update the printer
rmware. For instructions on how to update the printer rmware, go to http://support.hp.com, search for
your printer, and then search on “update the rmware.”
Check the following items to verify that the printer is communicating with the network. Before beginning,
print a conguration page from the printer control panel and locate the printer IP address that is listed on this
page.
Poor physical connection
The computer is unable to communicate with the printer
The printer is using incorrect link and duplex settings for the network
New software programs might be causing compatibility problems
The computer or workstation might be set up incorrectly
The printer is disabled, or other network settings are incorrect
NOTE: HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating
systems and not of the HP print drivers. For more information, go to Microsoft at www.microsoft.com.
Poor physical connection
1. Verify that the printer is attached to the correct network port using a cable of the correct length.
2. Verify that cable connections are secure.
3. Look at the network port connection on the back of the printer, and verify that the amber activity light
ashes indicating network trac, and the green link-status light is continuously lit indicating a network
link.
4. If the problem continues, try a dierent cable or port on the hub.
The computer is unable to communicate with the printer
1. Test network communication by pinging the network.
ENWW Solve connectivity problems 361

Table of Contents

Related product manuals