HP LaserJet Enterprise M607n - Conditions that can cause the defect; Solutions for the defect; Parts related to the defect

Conditions that can cause the defect
●
The defect appears in large areas of ll and is more severe in low temperature and humidity
environments.
●
The defect appears in large areas of ll and becomes worse as the printer temperature become hot.
Solutions for the defect
●
Resend the job after letting the printer cool.
●
Change the print mode from Full Speed to Quiet Mode (1/2 speed) to improve the issue. At the printer
control panel open the following menus: Settings > General > Quiet Mode > On.
●
If the error persists, replace the fuser.
Parts related to the defect
NOTE: The following item(s) might need to be repaired or replaced to prevent this defect form occurring.
●
Media
●
Toner
●
Fuser
278 Chapter 2 Solve problems ENWW