HP LaserJet Enterprise M607n - Clean the printer; Clean the paper path; Print a cleaning page

Clean the printer
NOTE: To clean the printer exterior, use a soft, water-moistened cloth.
●
Clean the paper path
●
Print a cleaning page
●
Check the scanner glass for dirt and smudges (MFP)
●
Clean the pickup rollers and separation pad in the document feeder (MFP)
●
Clean the Tray 1 roller and separation pad
●
Clean the Tray 2-X rollers
Clean the paper path
Over time, particles of toner and paper accumulate inside the printer. This can cause print-quality problems
during printing. Cleaning the paper path eliminates or reduces these problems.
Clean the paper path and toner-cartridge areas every time that the toner cartridge is changed or whenever
print-quality problems occur. As much as possible, keep the printer free from dust and debris.
Print a cleaning page
Print the cleaning from a touchscreen control panel
1. From the From the Home screen on the printer control panel, swipe (right), and then touch the Support
Tools button.
2. Open the following menus:
●
Maintenance
●
Calibration/Cleaning
●
Cleaning Page
3. Touch the Print button.
NOTE: Use the Cleaning Page screen to setup an Automatic Cleaning Interval. Touch the desired page
interval, and then touch the Done button.
Print the cleaning page from an LCD control panel
1. From the Home screen on the printer control panel, use the down arrow button to select the Print
menu.
2. Use the right arrow button to scroll to and select the Support Tools menu, and then press the OK
button.
3. Use the down arrow button to scroll to and select the Maintenance menu, and then press the OK
button.
4. Use the down arrow button to scroll to and select the Calibration/Cleaning menu, and then press the
OK button.
ENWW Clean the printer 279