HP LaserJet Enterprise M607n - Printer resets; Restore factory-set defaults; Printer cold reset

Printer resets
●
Restore factory-set defaults
●
Printer cold reset
Restore factory-set defaults
Restore factory-set defaults from a touchscreen control panel
1. From the Home screen on the printer control panel, swipe (right), and the touch the Support Tools item.
2. Open the following menus:
●
Settings
●
General
●
Restore Factory Settings
3. Touch Reset to reset current user specied default settings to the factory default settings, or touch
Cancel to return to the General menu.
Restore factory-set defaults from from a LCD control panel
1. From the Home screen on the printer control panel, use the down arrow button to select the Print
menu.
2. Use the right arrow button to scroll to and select the Settings menu, and then press the OK button.
3. Use the down arrow button to scroll to and select the General menu, and then press the OK button.
4. Use the down arrow button to scroll to and select the Reset Factory Settings item, and then press the
OK button.
5. Use the left arrow or right arrow buttons to select the Reset item, and then press the OK button.
NOTE: Touch the Cancel button to return to the General menu.
Printer cold reset
Cold reset using the Pre-boot menu from a touchscreen control panel
CAUTION: This procedure resets all product congurations and settings to factory defaults (customer
congurations and settings are lost).
1. Touch the middle of the control-panel display when you see the 1/8 under the logo.
ENWW Service mode functions 371