HP LaserJet Enterprise M607n - Page 398

Figure 2-141 Open the Pre-boot menu
1 2
2. Use the down arrow button to highlight the +3:Administrator item, and then touch the OK button.
3. Use the down arrow button to highlight the +8:Startup Options item, and then touch the OK button.
4. Use the down arrow button to highlight the 2 Cold Reset item, and then touch the OK button.
5. Touch the Home button to return to the main Pre-boot menu and highlight the 1 Continue item, and then
touch the OK button.
NOTE: The printer initializes.
Cold reset using the Pre-boot menu from a LCD control panel
1. Press the Cancel button when you see the 1/8 under the logo
2. Use the down arrow button to scroll to and select the +3:Administrator menu, and then press the OK
button.
3. Use the down arrow button to scroll to and select the +8:Startup Options item, and then press the OK
button.
4. Use the down arrow button to scroll to and select the 2 Cold Reset item, and then press the OK button.
5. Touch the Home button to return to the main Pre-boot menu and highlight the 1:Continue item, and then
touch the OK button.
NOTE: The printer initializes.
372 Chapter 2 Solve problems ENWW