12. Slightly move the rollers to the right to free them from the blue post. Make sure that the roller is clear of
the black post on the right.
Slightly lift up the front of the roller assembly (callout 1), and then pull the assembly away from the
printer (callout 2) to remove it.
IMPORTANT: Use a damp, lint-free cloth to gently clean the rollers.
NOTE: When handling rollers or pads, avoid touching the spongy surfaces. Skin oils and ngerprints on
a roller surface can cause print-quality problems.
Figure 2-134 Remove the rollers
ENWW Clean the printer 293
To Next Page
Loading...