5. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides so
they are touching the paper stack without bending it.
6. Make sure that the tray is fully inserted in the product.
7. If you are printing on heavy, embossed, or perforated paper, use the manual feed feature and feed
sheets one at a time.
8. Open the Trays menu on the product control panel. Verify that the tray is congured correctly for the
paper type and size.
9. Make sure the printing environment is within recommended specications.
ENWW Solve paper handling problems 309
To Next Page
Loading...