HP LaserJet Enterprise M607n - Page 410

4. If necessary, press the down arrow button to highlight +1 Download, and then press the OK button.
5. Insert the USB ash drive with the .bdl le on it into the USB port on the printer.
NOTE: If the error message No USB Thumbdrive Files Found displays on the control-panel display, try
using a dierent portable storage device.
6. Press the down arrow button to highlight USB Thumbdrive, and then press the OK button.
7. Press the down arrow button to highlight the .bdl le, and then press the OK button.
NOTE: The upgrade process can take 10 minutes or longer to complete.
TIP: If there is more than one .bdl le on the storage device, make sure to select the correct le for this
printer.
8. When the message Complete displays on the control-panel display, turn the printer power o, and then
on again.
9. When the upgrade process is complete, print a conguration page and verify that the upgrade rmware
version was installed.
384 Chapter 2 Solve problems ENWW