HPE FlexFabric 5940 SERIES Configuration Guide

17
Task Command
Display interface traffic statistics.
display counters
{
inbound
|
outbound
}
interface
[ interface-type [ interface-number |
interface-number.subnumber ] ]
Display traffic rate statistics of interfaces
in up state over the last statistics polling
interval.
display counters rate
{
inbound
|
outbound
}
interface
[ interface-type [ interface-number |
interface-number.subnumber ] ]
Display the operational and status
information of the specified interfaces.
display interface
[ interface-type [ interface-number |
interface-number.subnumber ] ] [
brief
[
description
|
down
] ]
Display information about dropped
packets on the specified interfaces.
display packet-drop
{
interface
[ interface-type
[ interface-number | interface-number.subnumber ] ] |
summary
}
Display the PFC information for an
interface.
display priority-flow-control interface
[ interface-type
[ interface-number ] ]
Display information about storm control
on the specified interfaces.
display storm-constrain
[
broadcast
|
multicast
|
unicast
]
[
interface
interface-type interface-number ]
Display the Ethernet module statistics.
display ethernet statistics slot
slot-number
Clear interface or subinterface statistics.
reset counters interface
[ interface-type [ interface-number |
interface-number.subnumber ] ]
Clear the statistics of dropped packets
on the specified interfaces.
reset packet-drop interface
[ interface-type [ interface-number
| interface-number.subnumber ] ]
Clear the Ethernet module statistics.
reset ethernet statistics
[
slot
slot-number ]

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English