HPE FlexFabric 5940 SERIES Configuration Guide

21
Step Command Remarks
2. Enter interface range
view.
• interface range
{ interface-type
interface-number [ to
interface-type
interface-number ] } &<1-24>
• interface range name name
[ interface { interface-type
interface-number [ to
interface-type
interface-number ] } &<1-24> ]
By using the
interface range name
command, you assign a name to an
interface range and can specify this
name rather than the interface range
to enter the interface range view.
3. (Optional.) Display
commands available for
the first interface in the
interface range.
Enter a question mark (?) at the
interface range prompt.
N/A
4. Use available
commands to configure
the interfaces.
Available commands depend on
the interface.
N/A
5. (Optional.) Verify the
configuration.
display this
N/A
Displaying and maintaining bulk interface
configuration
Execute the display command in any view.
Task Command
Display information about the interface ranges
created by using the
interface range name
command.
display interface range
[
name
name ]

HPE FlexFabric 5940 SERIES Specifications

General

Brand	HPE
Model	FlexFabric 5940 SERIES
Category	Switch
Language	English