Basic Call Features
104
1. Setting →Preference → Three Way Call Release Type: Transfer.
2. A place a call to B, B answer, A place a call to C again, C answer, A press the
conference then A, B and C will establish meeting.
3. A press the End Call soft key or on-hook to exit the meeting in the process of talking.
4. Then B and C will continue to talk.
Transfer to New Call via Web interface
1. Click Setting → Features
2. Select Transfer Mode via DSS key → New Call
3. Select the desired Line Key and select Transfer in the Type.
4. Enter the phone number in the Value field.
NOTE: if the person that wanted to be spoken to do not want to answer the call,
then the person that answered the coming call could use this function.
To Next Page
Loading...
