To Next Page
K
Kristin HernandezAug 2, 2025
What to do if operation indicator is off on Huawei ECC500?
- QqvelazquezAug 2, 2025
If the operation indicator is off or blinks at 4 Hz, check the power supply and communication with the host.
What to do if operation indicator is off on Huawei ECC500?
If the operation indicator is off or blinks at 4 Hz, check the power supply and communication with the host.
What to do if the alarm indicator is on Huawei Controller?
If the alarm indicator is on, view the alarm information and rectify the fault.
General| Model | ECC500 |
|---|---|
| Service Ports | 2 x 10/100/1000BASE-T |
| USB Ports | 2 x USB 2.0 |
| Console Port | 1 x RJ45 |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
Covers general safety rules and personal safety.
Details the qualifications needed for safe operation.
Covers grounding, cabling, and ESD safety.
Specifies safe operating locations and conditions.
Addresses safe practices for hoisting and ladder use.
Outlines the overall installation process.
Covers rack-mounted and wall-mounted installation procedures.
Step-by-step guide for installing ECC500 and related units.
Guides on connecting various cables to the ECC500.
Covers Ground, IP Network, Monitoring, and Power cables.
Provides instructions for connecting various devices like UPSs and sensors.
Covers initial setup and verification of the ECC500.
Verifies indicators, comm params, and device addresses.
