Copyright © Huawei Technologies Co., Ltd.
Procedure
Step 1 Open the Internet Explorer, choose Tools > Internet Options.
Step 2 Click Advanced, and select Use TLS1.1 and Use TLS1.2.
Step 3 Click Connections, and select LAN settings.
Step 4 Deselect Use a proxy server for your LAN in the Proxy server area.
Step 5 Click OK.
----End
Follow-up Procedure
If the ECC500 collector still cannot be logged in on the WebUI, contact Huawei technical
support.
7.3 How Can I Install a Network Security Certificate?
Prerequisites
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
You have copied a network security certificate and its key you obtained to the PC.
Context
Install a network security certificate if a security certificate problem message is
displayed when you attempt to log in to the ECC500 WebUI.
You need to apply to an organization authorized by the customer for a network security
certificate and its key with the ECC500 IP address or domain name. This section
describes how to import the certificate and key.
Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose System Settings > Site Settings.
Step 3 Click Select a file behind Select network security certificate.
Step 4 Select the network security certificate to be imported from the PC and click Upload.
Step 5 Click Select a file behind Select the network security certificate key to be uploaded.
Step 6 Select the network security certificate key to be imported from the PC and click Upload.
Step 7 (Optional) If the network security certificate is encrypted, select If an encrypted private key
is imported, enter the password for decryption., and enter Key password and Confirm
key password.
To Next Page
Loading...
