Copyright © Huawei Technologies Co., Ltd.
Step 5 Press and to change the value and press to confirm. Enter the old password
and then change the LUI password.
----End
7.7 How Can I Change the ECC500 WebUI Password?
Prerequisites
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Maintenance > User Management.
Step 3 Select the user you want to modify, as shown in Figure 7-5.
Figure 7-5 Changing the ECC500 password_01
Step 4 Click Modify.
Remember the new password because it is necessary for ECC500 commissioning and
maintenance.
Step 5 Select Change Password, set New Password and Confirm password for the ECC500, and
click Confirm, as shown in Figure 7-6.
To Next Page
Loading...
