Need help?Do you have a question about the Huawei ECC800 and is the answer not in the manual?
General| Input Voltage | 100 V AC to 240 V AC |
|---|---|
| Input Frequency | 50 Hz/60 Hz |
| Storage Temperature | -40°C to +70°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Protection Level | IP20 |
| Product Type | Controller |
| Altitude | 0 m to 4000 m |
| Cooling Method | Natural cooling |
| Communication Interfaces | RS485, Ethernet |
| Supported Protocols | Modbus, SNMP |
Describes the ECC800-Pro data center controller's features, devices, user interfaces, commissioning, FAQs, and troubleshooting.
Provides general safety instructions for installing, operating, and maintaining the equipment.
Specifies the qualifications and training required for personnel involved in installing and operating Huawei equipment.
Covers grounding requirements and precautions for AC and DC power handling.
Lists the key features of the ECC800-Pro, categorized as Efficient, Simple, and Reliable.
Details the ECC800-Pro unit, including its product configuration and environmental specifications.
Explains the two possible configurations for the ECC800-Pro collector.
Describes the ECC800-Pro main control module, including its ports and technical specifications.
Introduces various southbound devices that can be connected to the ECC800-Pro.
Describes the UIM20A expansion module, its specifications, and interface details.
Introduces the access control system and its components like aisle and cabinet access control.
Describes the Web User Interface (WebUI) for accessing the ECC800-Pro.
Details the functions and usage of the mobile phone application for ECC800-Pro management.
Covers prerequisites and steps for logging into the ECC800-Pro WebUI.
Guides on authenticating the startup password for FusionModule800 system type.
Covers managing access control devices and user permissions.
Explains linkage control logic, including FusionModule2000 and FusionModule800 scenarios.
Describes NetEco management and third-party NMS management (SNMP).
Lists common faults and troubleshooting steps for PSUs and Main Control Modules.
Guides on replacing components like Main Control Module, PSU, Antennas, and SIM Card.
Covers common operations and questions related to the WebUI interface.
Provides instructions for setting and adding various devices like UPS, PDU, and sensors.
To Next Page
