Huawei ECC800 - Creating an ECC800-Pro on the Neteco

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
6 Feature Description
Issue 06 (2020-04-22)
Copyright © Huawei Technologies Co., Ltd.
203
Path
Parameter
Default
Value
Setting
link setup
Table 6-48 Setting the authentication password
Path
Parameter
Default
Value
Setting
System
Settings >
NMS
Application >
NetEco > Set
Authenticatio
n Password
Authentication
password
Modifyme_
123
Set this parameter based on customer
requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,
./?-`$'(8-32 characters that
include at least three of the
following types: lowercase
letters, uppercase letters,
digits, and special characters)
Confirm
authentication
password
-
-
Step 5 Click Submit.
----End
6.14.1.3 Creating an ECC800-Pro on the NetEco
Prerequisites

You have logged in to the NetEco client by web browser.

You have created modules in Data Center Planning.
Context
For detailed operations, see iManager NetEco 6000 Device Installation and Commissioning
Guide of the corresponding version.
Procedure
1. Choose System> Configuration > Data Center Planning from the main menu. The
Data Center Planning window is displayed.
2. Click in the upper left area of the Data Center Planning window.
3. Click Access switch to the Add Device window. You can add an ECC800-Pro device to
the specified modular in the Add Device window.