Huawei ECC800 - Cabinet Access Control System

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
3 Device Description
Issue 06 (2020-04-22)
Copyright © Huawei Technologies Co., Ltd.
40
3.2.4.2 Cabinet Access Control System
The cabinet access control system applies to cabinets in the aisle containment to ensure data
and device security.
Electronic Cabinet Lock
Features:

An IC card can be used after being authorized using software.

An IC card can be authorized for one lock or all locks.

Door opening information is recorded through a network.

The system displays the status of cabinet doors and locks in real time, the system
displays the status of cabinet doors and locks in real time and reports the unauthorized
door opening.

The system supports remote unlocking.
Figure 3-17 Electronic cabinet lock
Table 3-36 Cabinet electronic lock specifications
Item
Specifications
Rated input voltage
12 V DC
Rated current
200–300 mA
Unlock mode
Unlocking with a powered card
Card type supported
IC card
Mechanically unlock
Supported
Mechanical Code Lock
Features:

The cabinet door can be opened with only the key and without the password.