ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Copyright © Huawei Technologies Co., Ltd.
About This Document
Purpose
This document describes the ECC800-Pro data center controller in terms of features, devices,
user interfaces (UIs), and power-on commissioning, as well as frequently asked questions
(FAQ) and troubleshooting measures.
This document describes all the functions of the ECC800-Pro. Certain functions are
implemented by hardware such as the UPS and PDU, and may be unavailable if the hardware
is not connected to the ECC800-Pro.
The ECC800-Pro functions described in the user manual are applicable to multiple
FusionModule solutions, and some functions may be applicable only to a few FusionModule
solutions. For details about the applicable ECC800-Pro functions, see the FusionModule
solution documentation.
The figures provided in this document are for reference only.
This document applies to the ECC800-Pro data center controller. The software version is
ECC800 V100R003C00.
Intended Audience
This document is intended for:
Sales engineers
Technical support engineers
Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Indicates a hazard with a high level of risk which, if not avoided,
will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
To Next Page
Loading...
