ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Copyright © Huawei Technologies Co., Ltd.
Default Button
Table 3-82 Default button description
Hold down the button
for more than 10s.
Reset to the default IP address
(192.168.0.10)
3.2.20.2 iBAT
The iBAT is a battery monitoring module that monitors the voltages, internal resistances, and
pole temperatures of batteries and supports 12 V power.
Features
Monitors the voltages, internal resistances, and pole temperatures of 12 V batteries.
Supports the hibernation function. (When it detects that the battery voltage is low, it will
enter the low-power mode.)
Communicates with the iBOX wirelessly.
iBAT Appearance
Figure 3-52 iBAT2.0
To Next Page
Loading...
