Huawei ECC800 - 8 Faq; Webui Operations; How Can I View Version Information; How Do I Set the Date and Time

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
8 FAQ
Issue 06 (2020-04-22)
Copyright © Huawei Technologies Co., Ltd.
219
8 FAQ
8.1 WebUI Operations
8.1.1 How Can I View Version Information?
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Click in the upper right corner of the home page and view the ECC800-Pro version
information.
Step 3 Choose Maintenance > Version Information and view the version information of
ECC800-Pro and connected device.
----End
8.1.2 How Do I Set the Date and Time?
Procedure
Step 1 Choose System Settings > System Parameters > Time.
Step 2 Set the time zone, date, and time, or click Obtain local time. Then, click Submit.
Step 3 (Optional) If the NTP server is used for time synchronization, select NTP server sync, set
NTP primary server IP, NTP backup server IP, Port number, and Sync interval (min),
and click Submit.
----End