ECC800 Data Center Controller
User Manual (for ECC800-Pro)
Copyright © Huawei Technologies Co., Ltd.
8.1.24 How Can I Rectify Camera Access Restriction?
Prerequisites
If Huawei S12700 series switch is used, refer to this section to rectify the fault. For more
information, consult network engineers.
Context
The camera is inaccessible after the MAC address and IP address are bound in network
configuration.
Procedure
Step 1 Configure the free-rule MAC address using the free-rule configuration method so that users
can access the network without authentication. For details, see section "authentication
free-rule" in the S12700 V200R008C00 Product Documentation.
----End
8.1.25 How Should I Add the Devices Accessed Through a Smart
ETH Gateway over Modbus-TCP to the ECC800-Pro WebUI?
Prerequisites
The device supports DHCP.
To Next Page
Loading...
