Huawei ECC800 - Third-Party NMS Management (over SNMP); Connecting a Communications Cable; Setting SNMP Management Parameters

ECC800 Data Center Controller
User Manual (for ECC800-Pro)
6 Feature Description
Issue 06 (2020-04-22)
Copyright © Huawei Technologies Co., Ltd.
207
Figure 6-65 Page for managing transparent transmission channels
----End
6.14.2 Third-party NMS Management (over SNMP)
6.14.2.1 Connecting a Communications Cable
Procedure
Step 1 Connect a communications cable to the WAN1 port on the ECC800-Pro.
Figure 6-66 Connecting a communications cable
----End
6.14.2.2 Setting SNMP Management Parameters
Prerequisites
Before setting SNMP parameters, obtain the information listed as follows from the NMS.
Table 6-50 Information obtained from the NMS
Item
Default
Value
Description