Item Specications
Wiegand
interface
Two Wiegand interfaces, 12 V DC card reader operating power
output; two routes of card readers (non-ngerprint readers) can
operate at the same time.
BLINK
button
● Press the button for less than 1 second to start blinking.
● Hold down the button for 1–5 seconds to search for a network
and start networking.
● Hold down the button for more than 10 seconds to clear
network parameters.
Address DIP
switch
4-pin address DIP switch
E-label Supported
Indicators
Table 3-50 Access actuator indicator description
Indicator
Color Name Status
PWR Green Power input status
indicator
● Steady on: The
power input is
normal.
● O: There is no
power input.
FusionModule800 Smart Small Data Center
User Manual 3 System Architecture
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 75
To Next Page
Loading...
Need help?
General