Huawei N2000H V3 - Page 210

N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
201
Prerequisites
Conditions

You have powered off the N2000H V3. For details, see 3.2 Powering Off.

You have removed the chassis cover from the N2000H V3. For details, see 5.6
Removing the Chassis Cover.

You have removed the air duct from the N2000H V3. For details, see 5.8 Removing the
Air Duct.

You have removed the full-height full-length riser card from the N2000H V3 if any. For
details, see 5.12 Removing the Riser Card.
Data

You have determined the position on the N2000H V3 for installing a DIMM.

You have obtained the rack number and chassis number of the N2000H V3, and labeled
its panel to prevent misoperations.
Tools

ESD gloves

Packaging materials, for example, memory riser box
Hardware
You have obtained a spare DIMM.
Procedure
Step 1 Take the spare DIMM out of the memory riser box.
Step 2 Open the two fixing clips of the DIMM slot. See Figure 5-60.
Figure 7-60 Opening the fixing clips of a DIMM slot
Step 3 Align the DIMM with the DIMM slot, and insert the DIMM into the slot. See Figure 5-61.
The two fixing clips close automatically.