N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 2 Before installing the mainboard, ensure that CPU sockets do not have bent bins and are free
from foreign objects.
If CPU sockets have bent bins and foreign objects are detected on CPU sockets, stop
installing mainboard and contact Huawei technical support.
Step 3 Place the mainboard into the N2000H V3, and push the mainboard in the arrow direction until
it does not move while holding the handle. See step (1) in Figure 5-65.
Step 4 Screw the mainboard using the Phillips screwdriver. See step (2) in Figure 5-65.
Figure 7-65 Installing the mainboard
Step 5 Connect all cables. For details, see 1.7 Internal Cabling.
Step 6 Install the fan support in the chassis. See Figure 5-66.
To Next Page
Loading...
