HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
3 NE40E-X8 Chassis Overview
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 3-30 lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.
Table 3-30 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
10M/100M/1000M auto-sensing interfaces, supporting half-duplex and
full-duplex modes
Category 5 unshielded twisted pair (UTP) cables recommended when
the interface rate is 10 Mbit/s or 100 Mbit/s; super category 5 Shielded
Twisted Pair (STP) cables recommended when the interface rate is
1000 Mbit/s
Table 3-31 lists the console interface attributes.
Table 3-31 Console interface attributes
Duplex Universal Asynchronous Receiver/Transmitter (UART)
9600 bit/s (default value), which can be changed as required
DCE (Data Circuit-terminating Equipment)
Table 3-32 lists the AUX interface attributes.
Table 3-32 AUX interface attributes
To Next Page
Loading...
