Huawei Quidway S6700 series User Manual

l Run the display rrpp verbose domain command on Switch C to view the domain
information.
# View detailed information about domain 1.
[SwitchC] display rrpp verbose domain 1
Domain Index : 1
Control VLAN : major 10 sub 11
Protected VLAN : Reference Instance 1
Hello Timer : 2 sec(default is 1 sec) Fail Timer : 7 sec(default is 6 sec)
RRPP Ring : 1
Ring Level : 0
Node Mode : Transit
Ring State : Linkup
Is Enabled : Enable Is Active : Yes
Primary port : XGigabitEthernet0/0/1 Port status: UP
Secondary port: XGigabitEthernet0/0/2 Port status: UP
# View detailed information about domain 2.
[SwitchC] display rrpp verbose domain 2
Domain Index : 2
Control VLAN : major 20 sub 21
Protected VLAN : Reference Instance 2
Hello Timer : 3 sec(default is 1 sec) Fail Timer : 10 sec(default is 6 sec)
RRPP Ring : 2
Ring Level : 0
Node Mode : Transit
Ring State : Linkup
Is Enabled : Enable Is Active : Yes
Primary port : XGigabitEthernet0/0/3 Port status: UP
Secondary port: XGigabitEthernet0/0/4 Port status: UP
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 20 to 21
#
rrpp enable
#
stp region-
configuration
instance 2 vlan 20 to
21
active region-configuration
#
rrpp domain 2
control-vlan 20
protected-vlan reference-instance 2
timer hello-timer 3 fail-timer 10
ring 2 node-mode master primary-port XGigabitEthernet 0/0/1 secondary-port
XGigabitEthernet 0/0/2 level 0
ring 2 enable
#
interface XGigabitEthernet0/0/1
port hybrid tagged vlan 20 to 21
stp disable
#
interface XGigabitEthernet0/0/2
port hybrid tagged vlan 20 to 21
stp disable
#
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
94

Huawei Quidway S6700 series Specifications

General

Brand	Huawei
Model	Quidway S6700 series
Category	Network Router
Language	English