Huawei Quidway S6700 series - Page 109

l Configure UPE A.
# Create data VLANs 100 to 300 on UPE A.
<Quidway> system-view
[Quidway] sysname UPEA
[UPEA] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 VLAN 6 and data VLANs 100 to
200 in domain 1.
[UPEA] stp region-configuration
[UPEA-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[UPEA-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[UPEA-mst-region] active region-configuration
[UPEA-mst-region] quit
l # Configure UPE B.
# Create data VLANs 100 to 300 on UPE B.
<Quidway> system-view
[Quidway] sysname UPEB
[UPEB] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs 100
to 200 in domain 1.
[UPEB] stp region-configuration
[UPEB-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[UPEB-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
[UPEB-mst-region] active region-configuration
[UPEB-mst-region] quit
l Configure UPE C.
# Create data VLANs 100 to 300 on UPE C.
<Quidway> system-view
[Quidway] sysname UPEC
[UPEC] vlan batch 100 to 300
# Create instance 1 and map it to control VLANs VLAN 5 and VLAN 6 and data VLANs 100
to 200 in domain 1.
[UPEC] stp region-configuration
[UPEC-mst-region] instance 1 vlan 5 6 100 to 200
# Create instance 2 and map it to control VLANs VLAN 10 and VLAN 11 and data VLANs 201
to 300 in domain 2.
[UPEC-mst-region] instance 2 vlan 10 11 201 to 300
# Activate the configuration.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99