Huawei Quidway S6700 series - Page 125

[CE1-XGigabitEthernet0/0/2] stp disable
[CE1-XGigabitEthernet0/0/2] quit
l Configure CE2.
# Disable STP on the interfaces that need to be added to the RRPP ring on CE2. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[CE2] interface xgigabitethernet 0/0/1
[CE2-XGigabitEthernet0/0/1] port link-type trunk
[CE2-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[CE2-XGigabitEthernet0/0/1] stp disable
[CE2-XGigabitEthernet0/0/1] quit
[CE2] interface xgigabitethernet 0/0/2
[CE2-XGigabitEthernet0/0/2] port link-type trunk
[CE2-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
[CE2-XGigabitEthernet0/0/2] stp disable
[CE2-XGigabitEthernet0/0/2] quit
l Configure UPE A.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE A. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEA] interface xgigabitethernet 0/0/1
[UPEA-XGigabitEthernet0/0/1] port link-type trunk
[UPEA-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEA-XGigabitEthernet0/0/1] stp disable
[UPEA-XGigabitEthernet0/0/1] quit
[UPEA] interface xgigabitethernet 0/0/2
[UPEA-XGigabitEthernet0/0/2] port link-type trunk
[UPEA-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEA-XGigabitEthernet0/0/2] stp disable
[UPEA-XGigabitEthernet0/0/2] quit
l # Configure UPE B.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE B. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEB] interface xgigabitethernet 0/0/1
[UPEB-XGigabitEthernet0/0/1] port link-type trunk
[UPEB-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEB-XGigabitEthernet0/0/1] stp disable
[UPEB-XGigabitEthernet0/0/1] quit
[UPEB] interface xgigabitethernet 0/0/2
[UPEB-XGigabitEthernet0/0/2] port link-type trunk
[UPEB-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEB-XGigabitEthernet0/0/2] stp disable
[UPEB-XGigabitEthernet0/0/2] quit
[UPEB] interface xgigabitethernet 0/0/3
[UPEB-XGigabitEthernet0/0/3] port link-type trunk
[UPEB-XGigabitEthernet0/0/3] port trunk allow-pass vlan 100 to 300
[UPEB-XGigabitEthernet0/0/3] stp disable
[UPEB-XGigabitEthernet0/0/3] quit
[UPEB] interface xgigabitethernet 0/0/4
[UPEB-XGigabitEthernet0/0/4] port link-type trunk
[UPEB-XGigabitEthernet0/0/4] port trunk allow-pass vlan 100 to 300
[UPEB-XGigabitEthernet0/0/4] stp disable
[UPEB-XGigabitEthernet0/0/4] quit
l Configure UPE C.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE C. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPEC] interface xgigabitethernet 0/0/1
[UPEC-XGigabitEthernet0/0/1] port link-type trunk
[UPEC-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPEC-XGigabitEthernet0/0/1] stp disable
[UPEC-XGigabitEthernet0/0/1] quit
[UPEC] interface xgigabitethernet 0/0/2
[UPEC-XGigabitEthernet0/0/2] port link-type trunk
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
115