[UPEC-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPEC-XGigabitEthernet0/0/2] stp disable
[UPEC-XGigabitEthernet0/0/2] quit
[UPEC] interface xgigabitethernet 0/0/3
[UPEC-XGigabitEthernet0/0/3] port link-type trunk
[UPEC-XGigabitEthernet0/0/3] port trunk allow-pass vlan 100 to 300
[UPEC-XGigabitEthernet0/0/3] stp disable
[UPEC-XGigabitEthernet0/0/3] quit
[UPEC] interface xgigabitethernet 0/0/4
[UPEC-XGigabitEthernet0/0/4] port link-type trunk
[UPEC-XGigabitEthernet0/0/4] port trunk allow-pass vlan 100 to 300
[UPEC-XGigabitEthernet0/0/4] stp disable
[UPEC-XGigabitEthernet0/0/4] quit
l Configure UPE D.
# Disable STP on the interfaces that need to be added to the RRPP ring on UPE D. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[UPED] interface xgigabitethernet 0/0/1
[UPED-XGigabitEthernet0/0/1] port link-type trunk
[UPED-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[UPED-XGigabitEthernet0/0/1] stp disable
[UPED-XGigabitEthernet0/0/1] quit
[UPED] interface xgigabitethernet 0/0/2
[UPED-XGigabitEthernet0/0/2] port link-type trunk
[UPED-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
[UPED-XGigabitEthernet0/0/2] stp disable
[UPED-XGigabitEthernet0/0/2] quit
l Configure PE-AGG.
# Disable STP of the interfaces that need to be added to the RRPP ring on PE-AGG. Configure
the RRPP interfaces to allow packets of VLANs 100 to 300 to pass through.
[PE-AGG] interface xgigabitethernet 0/0/1
[PE-AGG-XGigabitEthernet0/0/1] port link-type trunk
[PE-AGG-XGigabitEthernet0/0/1] port trunk allow-pass vlan 100 to 300
[PE-AGG-XGigabitEthernet0/0/1] stp disable
[PE-AGG-XGigabitEthernet0/0/1] quit
[PE-AGG] interface xgigabitethernet 0/0/2
[PE-AGG-XGigabitEthernet0/0/2] port link-type trunk
[PE-AGG-XGigabitEthernet0/0/2] port trunk allow-pass vlan 100 to 300
[PE-AGG-XGigabitEthernet0/0/2] stp disable
[PE-AGG-XGigabitEthernet0/0/2] quit
Step 3 Create RRPP domains and configure the protected VLANs and control VLANs.
l Configure CE1.
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[CE1] rrpp domain 1
[CE1-rrpp-domain-region1] protected-vlan reference-instance 1
[CE1-rrpp-domain-region1] control-vlan 5
[CE1-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[CE1] rrpp domain 2
[CE1-rrpp-domain-region2] protected-vlan reference-instance 2
[CE1-rrpp-domain-region2] control-vlan 10
[CE1-rrpp-domain-region2] quit
l Configure CE2.
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[CE2] rrpp domain 1
[CE2-rrpp-domain-region1] protected-vlan reference-instance 1
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
116
To Next Page
Loading...
