VLANs 100 to 300 are configured on CE. Domain 1 and domain 2 share the traffic of packets
from VLANs 100 to 300. Packets from VLANs 100 to 200 are transmitted through domain 1,
and packets from VLANs 201 to 300 are transmitted through domain 2.
Table 3-6 shows the mapping between protected VLANs and instances in domain 1, domain 2,
and domain 3.
Table 3-6 Mapping between protected VLANs and instances
Domain ID Control VLAN Instance ID Protected VLAN Instance ID
Domain 1 VLAN 5, 6 Instance 1 VLAN 100-200 Instance 1
Domain 2 VLAN 10, 11 Instance 2 VLAN 201-300 Instance 2
Domain 3 (on
UPE D)
VLAN 20, 21 Instance 3 VLAN 100-300 Instance 1 and
instance 2
Domain 3 VLAN 20, 21 Instance 1 VLAN 100-300 Instance 1
Table 3-7 shows the master node of each ring, and the primary port and secondary port on each
master node.
Table 3-7 Master nodes, and primary and secondary ports on the master nodes
Ring ID
Master Node Primary Port Secondary Port
Ring 1 in domain 1 UPE D XGE 0/0/1 XGE 0/0/2
Ring 1 in domain 2 UPE D XGE 0/0/2 XGE 0/0/1
Ring 1 in domain 3 UPE F XGE 0/0/1 XGE 0/0/2
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
131
To Next Page
Loading...
