Take the display on Switch A as an example.
<SwitchA> display bfd session all verbose
--------------------------------------------------------------------------------
Session MIndex : 4097 (One Hop) State : Up Name : atob
--------------------------------------------------------------------------------
Local Discriminator : 1 Remote Discriminator : 2
Session Detect Mode : Asynchronous Mode Without Echo Function
BFD Bind Type : Interface(Vlanif13)
Bind Session Type : Static
Bind Peer IP Address : 10.1.1.6
Bind Interface : Vlanif13
FSM Board Id : 0 TOS-EXP : 7
Min Tx Interval (ms) : 1000 Min Rx Interval (ms) : 1000
Actual Tx Interval (ms): 1000 Actual Rx Interval (ms): 1000
Local Detect Multi : 3 Detect Interval (ms) : -
Echo Passive : Disable Acl Number : -
Destination Port : 3784 TTL : 255
Proc Interface Status : Disable
WTR Interval (ms) : -
Active Multi : -
Last Local Diagnostic : No Diagnostic
Bind Application : No Application Bind
Session TX TmrID : 16392 Session Detect TmrID : -
Session Init TmrID : - Session WTR TmrID : -
Session Echo Tx TmrID : -
PDT Index : FSM-0 | RCV-0 | IF-0 | TOKEN-0
Session Description : -
--------------------------------------------------------------------------------
Total UP/DOWN Session Number : 0/1
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 13
#
bfd
#
interface Vlanif13
ip address 10.1.1.5 255.255.255.0
#
interface XGigabitEthernet0/0/1
port hybrid pvid vlan 13
port hybrid untagged vlan 13
#
bfd atob bind peer-ip 10.1.1.6 interface Vlanif13
discriminator local 1
discriminator remote 2
commit
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 13
#
bfd
#
interface Vlanif13
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 5 BFD Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
208
To Next Page
Loading...
Need help?
General
