EasyManua.ls Logo

Huawei Quidway S6700 series - Page 260

Huawei Quidway S6700 series
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
l ID and virtual IP address of the VRRP group
l Priorities of Switch A and Switch B in the VRRP group
l Preemption mode
Procedure
Step 1 Configure VLANIF interfaces and assign IP addresses to the VLANIF interface.
# Create VLANs and add physical interfaces to VLANs.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan batch 100 200
[SwitchA] interface xgigabitethernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] port hybrid pvid vlan 100
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 100
[SwitchA-XGigabitEthernet0/0/1] quit
The configurations of Switch B and Switch C are similar to the configuration of Switch A, and
are not mentioned here.
# Configure an IP address for the VLANIF interface on SwitchA.
[SwitchA] interface vlanif 100
[SwitchA-Vlanif100] ip address 10.1.1.1 24
[SwitchA-Vlanif100] quit
[SwitchA] interface vlanif 200
[SwitchA-Vlanif200] ip address 192.168.1.1 24
[SwitchA-Vlanif200] quit
# Configure an IP address for the VLANIF interface on Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] interface vlanif 100
[SwitchB-Vlanif100] ip address 10.1.1.2 24
[SwitchB-Vlanif100] quit
[SwitchB] interface vlanif 400
[SwitchB-Vlanif400] ip address 192.168.2.1 24
[SwitchB-Vlanif400] quit
# Configure an IP address for the VLANIF interface on Switch C.
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] interface vlanif 200
[SwitchC-Vlanif200] ip address 192.168.1.2 24
[SwitchC-Vlanif200] quit
[SwitchC] interface vlanif 300
[SwitchC-Vlanif300] ip address 20.1.1.1 24
[SwitchC-Vlanif300] quit
[SwitchC] interface vlanif 400
[SwitchC-Vlanif400] ip address 192.168.2.2 24
[SwitchC-Vlanif400] quit
Step 2 Configure the OSPF protocol between Switch A, Switch B, and Switch C.
# Configure Switch A.
[SwitchA] ospf 1
[SwitchA-ospf-1] area 0
[SwitchA-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[SwitchA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[SwitchA-ospf-1-area-0.0.0.0] quit
[SwitchA-ospf-1] quit
# Configure Switch B.
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 6 VRRP and VRRP6 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250

Table of Contents

Related product manuals