iSeries Model 250 Packages and AS/400e Server 250 103
iSeries Model 250 Packages and AS/400e Server 250
12 MB/s performance (at the card level) for bulk data encryption. The #4801 is available
worldwide. The level of cryptographic function is determined by the Cryptographic Access
Provider licensed program, which is downloaded to the adapter.
It can only be installed in a high speed slot in the System Expansion Unit (#7102). On new
systems from the plant, the #4801 is shipped with the system, but not installed.
Local Area Networks and Asynchronous Transfer Mode
The following adapters and controllers support LAN attachment on the Model 250. One of the
following base LAN adapters is included at no charge with the LAN option:
• #9723 PCI Ethernet IOA
• #9724 PCI 16/4 Mbps Token-Ring IOA
• #9738 PCI 100/10 Mbps Ethernet IOA
Other adapters supporting LAN attachments are:
• #2723 PCI Ethernet IOA
• #2724 PCI 16/4 Mbps Token-Ring IOA
• #2838 PCI 100/10 Mbps Ethernet IOA
• #2815 PCI 155 Mbps UTP OC3 ATM IOA
• #2816 PCI 155 Mbps MMF ATM IOA
• #2818 PCI 155 Mbps SMF OC3 ATM IOA
• #2866 PCI Integrated Netfinity Server
#2838/#9738 PCI 100/10 Mbps Ethernet IOA
The #9738 is a base LAN option on the Model 250.
The 100/10 Mbps Ethernet PCI adapter feature allows the AS/400 system to attach to
standardized 100 Mbps high-speed Ethernet LANs and also allows attachment to existing 10
Mbps Ethernet LANs. This adapter comes with an RJ45 connector for attachment to UTP-5
media. It requires one high-speed PCI card slot. The Ethernet /IEEE 802.3 IOA is capable of
operating in half or full duplex mode. Cabling for 10 Mbps must be CAT-3 or CAT-5, and cabling
for 100 Mbps must be CAT 5 that meets or exceeds Industry Standard EIA/TIA T568A or T568B.
If the #2838/#9738 100/10 Mbps Ethernet is selected to be run on an Integrated xSeries
Server, then one #0222 specify feature (100/10 Mbps Ethernet on Integrated Netfinity Server)
is required for each #2838/#9738 ordered.
The #9738 is mutually exclusive with the #9723 and #9724 as a base LAN controller.
#2724/#9724 PCI 16/4 Mbps Token-Ring IOA
The #9724 is a base LAN option on the Model 250.
To Next Page
Loading...
Need help?
General
