EasyManuals Logo

IBM i Series Handbook

IBM i Series
908 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #311 background imageLoading...
Page #311 background image
I/O Processor 281
I/O Processor
One #0225 (1 Gbps Ethernet on the Integrated Netfinity Server) is required for each 1 Gbps
Ethernet adapter selected to run on the #2790/#2791.
One #0224 (100/10 Mbps Ethernet on the Integrated Netfinity Server) is required for each
#4838 selected to run on the #2790/#2791.
One #0223 (100 Mbps Token-Ring on the Integrated Netfinity Server) is required for each
#2744 selected to run on the #2790/#2791.
Native AS/400 functions are not supported, and the #2790/#2791 servers do not support
external host LAN.
The #2790/#2791 requires three PCI card slots on the system or expansion tower backplane.
Two slots are consumed by the #2790/#2791. The third slot is reduced to a short card slot,
which will be used by the first LAN IOA card.
The #2790/#2791 will ship with a keyboard/mouse splitter cable.
The #2790/#2791 supports only the Window NT and Windows 2000 operating systems.
These points apply:
• #0325 IPCS Extension Cable for Windows is the default (but may be removed).
• A minimum of 128 MB Netfinity IOP Memory is required.
• #1700 (IPCS Keyboard/Mouse for Windows) is the default (in those countries that offer
it).
• A display must be connected to the Integrated Netfinity Server to support Windows.
• For non-US keyboard/mouse and display, see:
http://www.as400.ibm.com/nt
#2890 PCI Integrated Netfinity Server
#2891 Integrated xSeries Server
The #2890 PCI Integrated Netfinity Server contains a 700 MHz slot 1 processor and four
memory slots in the Netfinity IOP.
The #2891 Integrated xSeries Server contains a 850 MHz Socket 370 processor and four
memory slots in the Netfinity IOP.
The #2890/#2891 is supported only in the Model 270 system unit and in the #5075 PCI
Expansion Tower when it is attached to the Model 270.
Each memory slot can contain either a 128 MB, a 256 MB, or a 1024 MB Netfinity IOP
Memory card. This provides a total memory capacity ranging from 128 MB to 4 GB.
Note: When the maximum memory is installed, only 3712 MB will be addressable.

Table of Contents

Other manuals for IBM i Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM i Series and is the answer not in the manual?

IBM i Series Specifications

General IconGeneral
Operating SystemIBM i
Form FactorRack, Tower
StorageSSD and HDD options
Securitycompliance
VirtualizationIBM PowerVM
CPUPOWER processors
ScalabilityScale-up

Related product manuals