IBM i Series

iSeries Model 830 177
iSeries Model 830
Remote Control Panel is installed and used from PCs running the Windows NT 4.0 or
Windows 2000 Professional PC operating system.
I/O Processor and I/O Adapter Support
This section lists the supported IOPs and IOAs. See “I/O Processor” on page 277 and “I/O
Adapters and Controllers” on page 291 for full descriptions.
LAN/WAN/Workstation IOAs
• #2743 PCI 1 Gbps Ethernet IOA
• #2744 PCI 100 Mbps Token Ring IOA
• #2760 PCI 1Gbps Ethernet UTP IOA
• #2772 Dual WAN/Modem Adapter
• #2773 Dual WAN/Modem Adapter
• #2805 PCI Quad Modem IOA
• #2806 PCI Quad Modem IOA
• #2817 PCI 155Mbps MMF ATM
• #4723 PCI 10 Mbps Ethernet IOA
• #4745 PCI Two Line WAN IOA
• #4746 PCI Twinaxial IOA
• #4750 PCI ISDN BRI U IOA
• #4751 PCI ISDN BRI S/T IOA
• #4761 PCI Integrated Analog Modem
• #4801 PCI Cryptographic Coprocessor
• #4815 PCI 155 Mbps UTP OC3 ATM IOA
• #4816 PCI 155 Mbps MMF ATM IOA
• #4818 PCI 155 Mbps SMF ATM IOA
• #4838 PCI 100/10 Mbps Ethernet IOA
• #9771 Base PCI 2-Line WAN with Modem
Internal Disk Unit Controllers
• #9778 Base PCI RAID Disk Unit Controller
• #4778 PCI RAID Disk Unit Controller
PCI configuration rules for OS/400 V5R1 hardware are quite flexible. See the PCI Card
Placement Rules chapter of the
iSeries and AS/400e System Builder , SG24-2155 for rules
for placing PCI card in configurations.
Note