IBM i Series

IBM Licensed Programs: System Management Products, Services 703
IBM Licensed Programs: System Management Products, Services
Note: The control panel cable part number is 04N5592 (CCIN is 0382).
AS/400 Operations Console support is available for OS/400 V4R3 and later. For V4R5, it is
the only type of PC console supported by the iSeries Model 270, 820, 830, and 840 systems.
Suggested Reading
For Operations Console requirements, refer to the Redbook
AS/400e to iSeries 400
Migration
, SG24-6055, at http://www.redbooks.ibm.com
Setup information is found in
Operations Console Setup , SC41-5508, and in the Information
Center at:
http://www.ibm.com/eserver/iseries/infocenter
Select the Operations Console topic under Client Access Express.
Extreme Support through Personalization (ESP): Service Offering
In our increasingly Web-based world, you need easier access to total solutions. An important
aspect of technology is technical support that helps make that technology work for us as
people. IBM has expanded its Extreme Support through Personalization (ESP) initiative to
include more easy-to-use, proactive, and personalized tools.
ESP Registration is now simpler for access to registered iSeries and AS/400 ESP functions
on the Web. Through IBM Registration (IR) services, you can now use a single user ID
(name) and password on the Web for access to many registered Web functions. Registered
users migrate to the new IR function through guided steps on the Web as they access
registered Web functions.
The single user ID and password through IR simplifies your Web logon process. You no
longer need to keep track of multiple user IDs and passwords.
An IR user ID and password are required when:
• You already have access to iSeries and AS/400 ESP registered functions
• To access registered ESP functions during the migration period using your old user ID
and password
• To use the new IR user ID and password
Note that individual registered functions may require additional information for initial access
to that function (for example, machine type).
To access the registration process, go to
http://www.as400service.ibm.com and click Register.